Release Agents for Die Casting Molds

Product Name: Release Agents for Die Casting Molds
Model: SilibaseRA-4ZAL
Usage Description:
● The recommended usage (dilution ratio): General processing: 1:120, complex processing: 1:100. Please according to the technology personnel deployment test concentration, finally to determine the best dilution ratio!
● The typical usage: 1kg release agent mixed with 100kgs purified water or mixed with 100 ~ 120 kgs diesel oil.
● If b e y o n d the typical usage, please contact us for technical support.
● Please use deionized water to dilute, helps to prolong the life of working liquid, reduce the use amount of concentrate, fully reflects the performance of the process fluid. 　　
● Unless the technical services allow outside, cannot add other material to concentrate and diluent. After dilution with water, it is milky white liquid.
● The concentration of control may be achieved through the refractometer and refraction coefficient of diluent concentration percentage.
Technical Indicators of SilibaseRA-4ZAL Release Agents for Die Casting Molds:
Odor：Non strong smell Density：0.85g/ml
Appearance：Transparent red brown liquid Working temperature：150℃-200℃
Flash point (COC)：Not applicable Refraction coefficient@20℃：1.2
Freezing point：-10℃ Ph (5% dilution)：7
Notify of SilibaseRA-4ZAL Release Agents for Die Casting Molds:
● Die-casting mold release agents must dilute with pure water or diesel oil, dilution ratio 1:100 ~ 1:120, gently shake or stir well before use; dilution ratio according to complexity of the casting and mould deep make appropriate adjustments.
● The spray gun or automatic system pay attention to spray evenly and blow dry.
● The best mould working temperature is 150 ℃ to 200 ℃.
● Die-casting mould release agent under normal temperature storage, pay attention to prevent frostbite prevent bask in, after opening attention hermetic seal good keeping.
Packing and Shelf Life: 20Kgs/barrel, 170Kgs/drum, sealed and stored at room temperature for at least 18 months from manufacture date.