vacuum ink filling machine—–auto vacuum ink filling machine

1. Summarize
1.1 This line is integration both
PLC program and pneumatic
technology capably for 1and 2.5kg
container to complete more than
ten working procedure like filing
by weighing ,vacuum sealing and
printing …,The line has greatly
improved production efficiency.

1.2 put 50 cans and 50 lids on
the shelf then join the pipeline
to the filling gun then start the
machine will be operated follow :
1.2.1 self-separating the can
and move to the electronic
balance.
1.2.2 open the valve and the
filling to be stopped when
reaching the number then move to
the platform for spraying .
1.2.3open the valve to spray well-
proportioned fog on the surface
and again move to the lid platform
1.2.4 the lid will be self-
putting and move to vacuum area.
1.2.5 the can will be carried to
the vacuum room when reach the
numerical value (usually -90
Kpa) and nitrogen (usually -30
Kpa) and then sealing (usually 1
secs.) all the numerical value
should set in advance. Then
open both drain tap and vacuum
room to move to the printing
area .
1.2.6 printing the can on the
bottom then convey for box up.(we
will buy the cartoner specialy)
1.2.7 when to pack other size
container it should adjust some
position and change both
separation equipment for can and
lid as well as bottom plate in
vacuum room.
1.2.8 we will supply some filling
gun and pipeline connection at
customers request for quite more
colors printing inks.
1.2.9 we also supply hopper
where to connect the three roll
machine and delivery pump
pipeline as well as filling gun.

The power source for pump and
pipeline connection etc all join
conveniently .

2. Technology Data
2.1 size of container
1: 1kg Φ15cm×7cm
2: 2.5kg Φ18cm×8cm
3: we will meet the special
request . biggest sizeΦ20cm×13cm

2.2 maximum weight 5kg
2.3
precision
±0.1%
2.4 biggest vacuum
95KPa
2.5 biggest vacuum after
nitrogen 40
KPa
2.6
printing
8 sets
2.7 packaging speed 12
sets./2.5kg can

10 sets./1kg can

2.8 air compression
0.6±0.05MPa
2.9
nitrogen
purity 99.9% pressure ≥0.3Mpa