Hard foam catalyst BDMA

Overview:

Name: Dimethylbenzylamine

Alias:BDMA,N-dimthylbenzylamine, dimethylbenzylamine, benzyldimethylamine, catalystBDMA, rigid foam catalystBDMA,N-Benzyldimethylamine,BDMA,CAS 103 -83-3

Molecular formula: C9H13N;

Relative molecular mass: 135.20;

CAS number: 103-83-3;

colorless to slightly yellow transparent liquid, soluble in ethanol, soluble in hot water, slightly soluble in cold water;

Purity≥99%;

Moisture content≤0.5%;

Viscosity (25℃): 90mPa.s;

Density (25℃): 0.897g/cm3;

Freezing point: -75℃;

Boiling range: 178-184℃;

Refractive index (25℃): 1.5011;

Flash point (TCC): 54℃;

Vapor pressure (20℃): 200Pa

Physical and chemical properties
Appearance properties	colorless to light yellow liquid.
Solubility	Slightly soluble in cold water, soluble in hot water, and miscible in alcohol and ether.
melting point	-75 °C
Boiling point	183-184 °C765 mm Hg(lit.)
Density	0.9 g/mL at 25 °C(lit.)
Refractive Index	n20/D1.501(lit.)
Flash point	130 °F
Storage conditions	Flammables area
Water solubility	8 g/L (20 ºC)
BRN	1099620

Purpose:

BDMA in the polyurethane industry is a catalyst for polyester polyurethane block soft foam, polyurethane rigid foam, polyurethane sheet and adhesive coating , Mainly used for rigid foam, can make polyurethane foam have good initial fluidity and uniform cells, and have better adhesion between foam and substrate;

BDMA In the field of organic synthesis, it is mainly used as a catalyst, corrosion inhibitor, acid neutralization for the synthesis of dehydrohalogen in organic drugs Accelerators, electron microscope slice embedding accelerators, etc.;

BDMA is also used in the synthesis of quaternary ammonium salts, the production of cationic surface active powerful fungicides, etc.;

BDMA In epoxy resin, it is mainly used to promote the curing system of acid anhydride, polyamide, aliphatic amine, etc., and accelerate the curing of products. Used as a curing accelerator in epoxy resin electronic potting materials, encapsulating materials, epoxy floor coatings, and marine paints;

BDMA Specific application examples include: carbon fiber/monomolecular epoxy resin-based composite laminates, electrophoretic coatings for epoxy substrates , Dry-type transformer potting glue;

Dimethylbenzylamine benzyldimethylamine catalyst BDMA hard foam catalyst BDMA N-benzyldimethylamine BDMA CAS 103-83-3

Alias:

Dimethylbenzylamine

Benzyldimethylamine

BDMA

103-83-3

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/bucket Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as waterproof grade. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits.

PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3

Over view:

Common Name: Benzyl Dimethyl Amine

Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine,

Physical and chemical properties:

Appearance	Form: transprant light yellow  liquid
Odour	no data available
PH	10 at 10 g/l at 20 °C
Melting point/freezing point	Melting point/range: -75 °C – lit.
Initial boiling point and boiling range	181 – 184 °C at 1.020 hPa – lit.
Flash point	53 °C – closed cup
Evaporation rate	no data available
Flammability (solid, gas)	Upper explosion limit: 6,3 %(V)
Upper/lower flammability or explosive limits	Lower explosion limit: 0,9 %(V)
Relative density	0,9 g/cm3 at 25 °C
Water solubility	soluble
Partition coefficient: noctanol/water	log Pow: 1,87
Molar formular	C9H13N
Molar mass	135.21

Features and uses:

A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams.

BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates.

BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents.

BDMA is used in flexible slabstock and rigid foam applications.

It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability.

BDMA is also used for flexible slabstock foam applications.

Storage Information ：

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

Package:

180KG/Steel Drum

(DABCO BDMA/Niax BDMA/ PC Cat NP60/ Addocat DB/ Jeffcat BDMA/ Lupragen N103)