Large supply of wood treasure-Chengdu concentrated wood softening syrup + concentrated solid wood softening syrup

Large supply of wood treasure-Chengdu concentrated wood softening liquid + concentrated solid wood softening liquid
Muzhibao-Chengdu concentrated wood softening syrup + concentrated solid wood softening syrup is a new type of high-efficiency board special softener newly developed by Weidelin Chemical. It is mainly used for softening and bending solid wood thick boards below 8 cm thick. Shape bending treatment, the softened plate can effectively improve the compressibility and parallel extension force of the plate. As a result, the sheet has good bendability and stretchability. Muzhibao-concentrated sheet softener has simple operation, does not change the original color of the sheet, high R-angle softening and bending efficiency, small R-angle softening and bending are not easy to break, the softened sheet has good dimensional stability, and the size is not easy to deform and rebound ( Internal buckle or external expansion), a series of advantages such as small usage in operation and low cost. It is widely adapted to soft bending and profiling bending treatments such as solid wood dining chair back bending, solid wood bed head bending, solid wood legs bending, solid wood armrest bending, mahogany furniture fittings bending, special-shaped solid wood craft products, etc.
1. Product physical and chemical properties:
1. Appearance: colorless and transparent liquid
2. PH value: 10～12
3. Proportion: 1.25
4. Odor: odorless
5. Active ingredients: ≥85%
6. Solubility: easily soluble in water
7. Thermal decomposition temperature: 260℃
8. Chemical composition: oxygen-modified mixture
2. Scope of application:
Muzhibao-concentrated sheet softener is mainly used for softening treatment of rubber wood, oak, ash, chrysanthemum, birch, oak, pine, mahogany and other tree species with a thickness of less than 8 cm. It is widely used in solid wood dining chair backs. , Solid wood bed head, solid wood table legs, solid wood handrails, mahogany furniture accessories, special-shaped solid wood craft products, etc. softening and profiling bending treatment.
3. How to use:
It is recommended to directly dilute Muzhibao-concentrated sheet softener and water into an aqueous solution with a concentration of 1-2%, and then heat and cook or soak in cold water (the specific heating and boiling time or cold water soaking time should be based on the actual thickness and Depending on the tree species, different tree species have different density and hardness, so the time of heating and cooking or the time of soaking in cold water is also different-see the processing technology and processing parameters in the product trademark column), then direct heating and cooking or cold water soaking can be used After the high-pressure steam treatment, when using steam or heat transfer oil to conduct the bending treatment, it is recommended that the preheating mold temperature is not less than 120 degrees. When using high-frequency mold heat transfer method for bending treatment, it is recommended that the holding time be appropriately extended by 2-3 minutes according to the actual thickness of the plate.
Four, matters needing attention:
1. Muzhibao-concentrated sheet softener can be reused after being diluted with water. Please do not throw it away after use to avoid waste
2. When the plate adopts the heating and cooking softening process, please ensure that the softened plate is bent at a temperature not lower than 60 degrees, which is suitable for continuous operation in large quantities (steam, heat transfer oil, high frequency).
3. It is recommended to extend the holding time for 2-3 minutes to ensure the dimensional stability of solid wood panels with a thickness of more than 40 cm and a thickness of less than 8 cm.
4. In case of accidental drinking, drink a lot of water, do not force vomiting, go to the hospital for treatment
5. Effective period of use: 24 months