MJB-H type sheet slip agent + wood product slip protection agent

MJB-H sheet slip agent + wood productsSlip protective agent
1: Product performance introduction:
1,MJB-H type sheet slip agent + wood productsSlip protective agentUsing a variety of high molecular polymers and high efficiency It is an environmentally-friendly water-based product that is compounded with surfactants, which can give almost all wood fiber materials a special smooth feel, wear-resistant, waterproof, dirt-resistant, bright, and anti-yellowing effects. After brushing or spraying treatment, the surface of the board can produce a strong sense of smoothness. After treatment, the original surface brightness of the board can be increased by 30-50%, and the acid-base resistance of the board surface can be increased by 30-40%. The waterproof effect of the board surface can be increased by 35-45%, and the fiber hardness of the board surface can be increased by 5-10%. The plane extension force of the board surface can be increased by 5% to 15%, and the board surface fiber The surface cracking phenomenon can be reduced by 50-70%, the yellowing of the board surface can be reduced by 30-60%, and the fiber stability coefficient can be increased by 30-50% after cooking or vacuum pressure.
2The treated board has a series of advantages such as clear texture, color keeping the original color of wood, odorless, translucent, smooth, hardened and anti-yellowing
3、MJB-H sheet slip agent is a concentrated liquid, with strong permeability and rapid dispersion
4, MJB-H sheet slip agent can be diluted with water according to requirements, and can be reused repeatedly after dilution, which greatly reduces the actual processing cost of the sheet
Two: Scope of application:
It is mainly suitable for all kinds of semi-finished plates and finished products, wooden floors, wooden doors and windows, wooden corners, wooden shutters, wooden fences, wooden open-air decorative fences, semi-finished wooden products and furniture, finished products, wooden crafts ( Protective treatment of wooden packaging wine boxes, wooden billiard cues, golf clubs)
Three:Product technical parameters:
1、Outside view: bright white lotion
2, stability: strong stability coefficient
3、Ionicity: cationic
4、Viscosity (25℃): 11～15 mpa.s
5、 Solubility: easily soluble in water
6、Qi 　 odor: no special odor
7, thanheavier1.12
8, melting point:190℃
9, effective active content: 85%
10,PHValue 6-7.5
Four: How to use:
Dilute the MJB-H type sheet slip agent and tap water into a 5-8% aqueous solution to cook or vacuum pressure the wood. Ensure the fluidity of the liquid during operation. Please refer to the detailed cooking and vacuum pressure operation process Refer to the product operating instructions to use:
Clean up the attachments on the wood surface before the operation, and then choose to dilute and mix with water in proportion.Configure into an aqueous solution, perform vacuum pressurization and soaking methods And spraying method treatment:
1. Vacuum pressure treatment: The recommended concentration is 8%-10%, and the vacuum pressure method is used to calculate the complete penetration of the drug. The general drug loading is 20～300kg/m3
2、Soaking method: The recommended concentration is 15-20%, and the water surface is completely covered with wood as the standard soaking time 5-10 minutes
3. Brushing and spraying treatment: It is recommended to use a concentration of 25%-30% to fully absorb the surface of the wood (complete wetting is the standard)
The spraying area is 25-30 square meters/KG, and it is recommended to use 2 times for brushing and spraying
Five: Matters needing attention:
1Dust and dirt on the surface of the wood must be cleaned up during operation, so as not to affect the permeability and reusability of the chemical liquid
2、If you touch your eyes, immediately wash them with plenty of tap water
3、Validity period: 3 years