Mould temperature machine heat conduction oil cleaning agent
short for mold temperature control machine (mold temperature control machine), currently available on the market There are two types, one uses water as the medium and the other uses heat transfer oil as the medium. The difference between the two kinds of mold temperature controllers, the advantages of using water as the medium (referred to as water temperature controller or water type mold temperature controller) are (1) no pollution. (2) The operating cost is low and almost don’t spend money on the medium. (3) The heating speed is fast and the response is fast. The advantages of using heat transfer oil as the medium (referred to as oil temperature machine or oil type mold temperature machine) are as follows: (1) It is safer to operate at low pressure at high temperature. (2) It can achieve a larger temperature control range than a water-type mold temperature machine. The function of the mold temperature machine is to heat up the mold temperature or cool down the mold temperature to reach a reasonable temperature and control the injection working temperature to ensure the stable quality of the injection molded parts and optimize the processing time.
mso-font-kerning:1.0000pt;”>According to the different medium of the mold temperature machine, during its long-term operation, coking and fouling will occur, which affects the temperature and production Therefore, Kaidi Chemical categorizes media coking, and mold temperature machine cleaning agents are also divided into two major categories: grease cleaner and scale cleaning agent. Shandong Kaidi Company divides it into KD-L218 mold temperature machine cleaning agent , KD-L418 mold temperature machine cleaning agent (mold temperature machine scale cleaning agent) and KD-L808 mold temperature machine online cleaning agent.
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>Next, I would like to introduce the products aboutKD-L218 mold temperature machine cleaning agent.
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>KD-L218Mold temperature machineCleaning agent
mso-font-kerning:1.0000pt;”>Based on the structure principle of the mold temperature machine and the on-site use environment, based on a large amount of practical experience, our company has developed a special system for cleaning the mold temperature machine oil circuit. An efficient cleaning agent product. This product has excellent permeability, emulsification and oil coke removal ability, and quickly penetrates to the bottom of carbon deposits through chemical action, dissolving, dispersing and stripping A variety of hard grease and carbon deposits, whether it is a thin layer of carbon deposition or a thick layer of carbon deposition, can be found in
mso-font-kerning:1.0000pt;”>4-6falls off and dissolves within an hour.
mso-font-kerning:1.0000pt;”>Widely used for cleaning
mso-font-kerning:1.0000pt;”>Mold temperature engine oil circuitHeavy grease and oil tar, oil sludge in the system
mso-font-kerning:1.0000pt;”>At the same time, it is also used to clean the coking and carbon deposits in the mold temperature machine oil circuit heat exchanger pipeline.
mso-font-kerning:1.0000pt;”>
Product features:
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>1, KD-L218The mold temperature machine cleaning agent has strong degreasing and decontamination ability; font>
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>2, safe and reliable, easy to use, high work efficiency;
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>3, PHThe value is 7, Neutral, safe and non-corrosive to most metal materials.
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>4, the residual liquid can be completely volatilized, leaving no trace after volatilization;
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>5, this product is an environmentally friendly cleaning agent, non-combustible, non-explosive, non-toxic, harmless and fast dissolution speed are the typical characteristics of this product;
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>6, can be recycled and reused, reducing costs.
mso-font-kerning:1.0000pt;”>
Applicable scope:
mso-font-kerning:1.0000pt;”>
1, used for cleaning
mso-font-kerning:1.0000pt;”>Heavy grease, tar, and sludge in the mold temperature engine oil circuitsystem.
mso-font-kerning:1.0000pt;”>2, used to clean the coking and carbon deposits in the mold temperature engine oil circuit heat exchanger pipeline.
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>3, used to clean the stubborn heavy oil on the surface of machinery equipment and machine tools.
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>4, used to clean crude oil grime and sludge on drilling platforms, crude oil pipelines, storage tanks, etc.
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>If you have product needs and questions, please call Shandong Kaidi Chemical Cleaning Division Technical Center to obtain a cleaning plan and quotation. The manufacturer supplies directly to the customer’s factory , Focusing on industrial chemical cleaning for ten years, product quality and technical strength are 100% guaranteed!
mso-font-kerning:1.0000pt;”>kaidihuagongqy