Non-stop cleaning agent for heat conduction oil furnace_heat conduction oil system cleaning

AJ-8-021 non-stop cleaning agent for heat conduction oil furnace is a new type of chemical online cleaning agent specially used for heat conduction oil heating system. This product can help loosen and remove carbon deposits, oxidation products, resins and colloids from heaters, piping facilities and heating vessels through special chemical reactions, and dissolve various types of grease and carbon deposits in the system. Soluble grease, the efficiency reaches more than 90%. The process is simple, does not need to stop, the operator is safe, does not affect the normal operation of the system, and does not cause dirt to block the pipe. It is the first choice for the majority of heat-conducting oil furnace heating systems.

Product features

Non-corrosive: After being added to the system, it will not change the characteristics of the system’s heat transfer oil, and it will be completed under non-corrosive conditions.

Thorough decoking: It can completely remove all kinds of insoluble grease and carbon deposits, with an efficiency of over 90%.

Process safety: The decoking process is to dissolve the grease and carbon deposits in the system, and the agent and oil are integrated, and there is no dirt shedding during the whole process.

Easy to use: just add AJ-8-021 non-stop cleaning agent to the running system as required.

Safe and harmless: harmless to the human body and the natural environment, it runs directly in the normal operating system.

Working principle

1. The additive product can capture the coking group of aromatics, hydrocarbon chain dehydrogenation cracking and condensation reaction, and inhibit the deterioration of heat transfer oil and coking;

2. The additive component cleans and disperses the heavy components of coking and fused-ring aromatic hydrocarbons after dehydrogenation in the system, liquefies and peels off the metal surface;

How to use

1. Treatment before discharge

Before discharging the degraded heat-conducting oil from the heat-conducting oil heating system device, add 5%-15% of the AJ-8-021 heat-conducting oil furnace non-stop cleaning agent into the system, and then continue to run 5-7 days. During this period, closely check the system’s built-in filter device to prevent clogging with residue. Then drain the system completely and inject new oil.

(1) Without stopping the machine, reduce the temperature of the oil furnace to between 100℃-300℃ (if the temperature of the boiler itself is in this range, it can be used directly), then pass the high position Add AJ-8-021 heat transfer oil furnace non-stop cleaning agent to the oil furnace system, add slowly in batches when adding, and the amount of each addition is generally about 0.5% to 1% of the system capacity, and dosing once every 1 hour . After the addition is complete, part of the heat transfer oil is discharged from the low oil discharge port so that the medicine slowly enters the circulation system through the high tank.

(2) Maintain the normal operation of the oil furnace. After the cleaning agent enters the system, it will be completely mixed with the heat transfer oil, and the polarized molecules in the online cleaning agent will slowly dissolve the oil on the pipe wall through the effect of penetration Coke.

(3) Pay attention to the pressure change within two days after adding the thermal oil online cleaning agent. If the pressure is obviously reduced, the bypass should be opened in time, and the filter screen should be cleaned to prevent the dissolved oil coke And large particles of grease clog the filter.

(4) Cycle cleaning for 5-7 days, and replace the heat transfer oil directly after cleaning.

If you have product needs and questions, please call Hebei Aijieneng Cleaning Service Co., Ltd. to obtain a cleaning plan and quotation.
Aijienengxjl 3034598832 www.aijeon.com
<img onclick=”if(this.src.indexOf(‘waitpic.gif’) == -1){_preview(Dd(‘showthumb1’).src, 1);}else{ Dalbum(1,5,100,100, Dd(‘thumb1’).value, true);}” id=”showthumb1″ title=”Preview picture” alt=”” src=”http://www.surfactant.com.cn/%20%20skin/default/image/lazy.gif” class=”lazy” original=”http://www.surfactant.com.cn/file/upload/201612/27/0846583298556.jpg.thumb.jpg” width=”100 “height=”100” />