Oil Tank Cleaner_Crude Oil Cleaner

After the oil storage tank is used for a period of time, the impurities in the crude oil will be deposited on the bottom and wall of the tank, The effective capacity of the oil storage tank is reduced, which affects the efficiency of the oil storage tank. Therefore, the oil storage tank needs to be inspected and repaired regularly. To remove sludge in tanks, the current domestic traditional oil tank cleaning methods mainly use labor. Manual tank cleaning has problems such as high labor intensity, long construction period, poor safety, low crude oil recovery rate, and environmental pollution. With the large-scale construction of large-scale oil storage tanks in my country and the increasing attention to environmental protection issues, manual cleaning has not met the objective requirements of the environment and development, and the elimination of manual cleaning is a historical inevitability.

mso-font-kerning:1.0000pt;”>KD-L3151 oil tank cleaner (crude oil cleaner) independently developed and produced by Shandong Kaidi Chemical Industry
mso-font-kerning:1.0000pt;”>Scientifically compounded by a variety of super-strong surfactants and other additives,
mso-font-kerning:1.0000pt;”>Available
mso-font-kerning:1.0000pt;”>Replace gasoline, diesel, kerosene, solvents,
mso-font-kerning:1.0000pt;”>Clean the machine oil, cutting oil, dust and dirt, polishing paste, lubricating oil, anti-rust grease and other minerals, animals and plants on the surface of various mechanical equipment and metal parts Grease etc.
mso-font-kerning:1.0000pt;”>effectively reduce costs
mso-font-kerning:1.0000pt;”>It does not corrode metals, does not damage the paint film, and is a non-toxic, harmless, safe, and non-polluting fuel-saving cleaning agent.
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>Ingredient composition:
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>It is composed of imported surfactants, polymer builders, inorganic co-solvents and metal protective agents.
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>Product Nature:
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>Appearance: light yellow viscous transparent liquid (original liquid)
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>PH value: 9-11
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>Relative density:1.02～1.05
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>How to use:
mso-font-kerning:1.0000pt;”>

1、 Scrub or brush method: According to the oil condition, dilute the cleaning agent5 ~10times. Sprinkle the diluted solution evenly on the area to be cleaned, wait for the agent to react for about 5 minutes, and then use a brush or professional cleaning tool to scrub or scrub. After the oil is cleaned, rinse it off with clean water.

2、Spraying method: in an environment that is not conducive to scrubbing or scrubbing, the diluted solution Use a high-pressure water gun to spray on the part to be degreasing, wait for about 5 minutes after reaction, then wash and rinse.
mso-font-kerning:1.0000pt;”>
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>3. Put the parts to be cleaned into the cleaning liquid, and you can choose to clean them by manual cleaning, scrubbing, brushing, mechanical spraying or ultrasonic cleaning. Parts after cleaning Wipe or dry with a clean cloth. When the oil is serious, the concentration of the cleaning agent can be increased. After using the cleaning solution for a period of time, it can remove the surface oil and bottom sediment. Add a proper amount of this product and continue using it.
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>4. It can be used at room temperature, and the best temperature is 50-60 degrees.
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>Packaging and storage
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>1. Packaging: 25kg/plastic drum; 200kg/plastic drum.
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>2. Storage: The shelf life is 2 years, stored in a cool and dry place.
mso-font-kerning:1.0000pt;”>

mso-font-kerning:1.0000pt;”>If you have product needs and questions, please call Shandong Kaidi Chemical Cleaning Division Technical Center to request a cleaning plan and quotation.
mso-font-kerning:1.0000pt;”>The manufacturer directly supplies to customers’ factories, focusing on industrial chemical cleaning for ten years, and the product quality and technical strength are 100% guaranteed! kaidihuagongys
mso-font-kerning:1.0000pt;”>