Pressing machine cleaning agent supply

Pressing machine cleaning agent
For the plate press machine used in the plate making workshop of the plate factory, the uneven temperature of the press plate during long-term use is caused by the decrease in heat transfer efficiency caused by the coking of the heat transfer oil. It is recommended to use the hot press steel plate. Special cleaning agent-Kaidi brand KD-L212 thermal oil press cleaning agent developed and produced by Kai Chemical Co., Ltd., which is specially used for hot press cleaning. Kaidi brand KD-L212 plate factory heat conduction oil press cleaning agent is an environmentally friendly solvent-based heat conduction oil cleaning agent. It has excellent permeability, emulsification and oil coke removal ability, and quickly penetrates into carbon deposits through chemical action At the bottom, it can dissolve, disperse and strip all kinds of hard grease and carbon deposits, whether it is a thin layer of carbon deposit or a thick layer of carbon deposits, it can fall off and dissolve within 4-6 hours. The effect is extremely significant, and it is safe and non-corrosive. It is currently a professional carbon removal product. The use environment is safe, non-combustible and non-explosive. It has a good cleaning effect for all kinds of oil coke, coke, and heat transfer oil coking, with a cleaning rate of more than 98%.
Kaidi brand KD-L212 sheet factory thermal oil pressure plate cleaning agent product features:
1. Suitable for cleaning of small and medium-sized hot presses;
2. Thorough cleaning, the cleaning rate is over 98%;
3. Safe and environmentally friendly, non-flammable and non-explosive;
4. It can be recycled and reused, saving cleaning costs.
5. Non-combustible, non-explosive, non-toxic and harmless, as well as fast dissolution rate and low volatilization rate are the typical characteristics of this product.
6. The speed of dissolving coke is much higher than that of similar products, and the speed of volatilization is much lower than that of similar products.
The cleaning process of the cleaning agent for the thermal oil pressure plate machine of the Kaidi KD-L212 sheet factory:
1. Drain the original heat transfer oil in the system (as far as possible to reduce the amount of cleaning agent), and check whether the circulation pipeline is unblocked to keep the system unblocked.
2. Cleaning: Add the cleaning agent of Kaidi brand KD-L212 sheet factory heat conduction oil press plate machine to the container, turn on the circulating pump to circulate, without heating, just use at room temperature. Switch the valve of the system so that all parts in the system can be cleaned. It is advisable to switch the valve every hour. The entire cleaning time is 4 hours (if the oil layer in the system is thick, the cleaning time needs to be increased). Open the cleaning of any part of the circulation pipeline to check the cleaning situation. If there is still grease, extend the cleaning time until it is completely peeled off and enter the next step.
3. Draining: Drain all the cleaning agent and grease in the system into the cleaning agent container. If possible, use an air compressor to purge the residual liquid in the jacket. When purging unconditionally, open all the valves of the heating kettle to air dry naturally.
4. Recycling cleaning agent: After cleaning, do not drain the cleaning solution. Although the color becomes black, the product can be reused. Because the reaction between this product and oil coke is a polar miscible reaction, after cleaning, the heat transfer oil will form an oil layer on the upper part of the cleaning fluid, and there is oil residue at the bottom. Just extract the oil layer. When cleaning the equipment next time, please Continue to use the cleaning solution, the effect remains unchanged.
5. The cleaning is over.
If you have product needs and questions, please call Kaidi Chemical to obtain a heat transfer oil furnace system cleaning or heat exchanger cleaning plan and quotation.