PU Elastomer Release Agent

Product Name: PU Elastomer Release Agent
Code: SilibaseRA-4311
Description:
SilibaseRA-4311 PU Elastomer Release Agent is the organ silicone and Teflon mixed liquid, excellent heat stability and chemical stability, good at remold and isolation effectiveness, non-corroding and without residual on the mould and good at mould surface, not influence the product’s adhesiveness and paint, not pollute the mould. SilibaseRA-4311 PU Elastomer Release Agent is concentrated of high pure silicone, avirulent insipidity, high lashing point for safety usage.
Main Application:
Polyurethane elastomer products, PU rubber covered roller, PU seal ring release agent.
Standards of SilibaseRA-4311 PU Elastomer Release Agent:
● Appearance：Colorless transparency liquid
● Density：0.96-0.98 g/ml
● Effective constituent：100%
● Viscosity：100-200 (MPAS/25℃）
● Flashing Point：≥300℃
● Dilution ratio (by weight)：1:20 diluted with gasoline or naphtha or n-hexane
● Working temperature：30~180℃
Application Method:
● Clean the mould and warming the mould up to 50℃.
● Use release agent after dilution (1kg mixed 20kgs solvent) and use the brush or spray gun to coat on the mould uniformly which can produce after the solvent volatilize.
● The quantity of use is based on the complexity and material of mould, normally PU elastomer need to spray 2-3 times.
● In order to have a better disperse on the mould surface, suggest to using the solvent mixture to dilute the release agent.
Store & Life: At least 12 months under original sealed container during -20℃~50℃. If pass the date, it needs to be used after the check out.
Packing: 25Kgs/barrel, 170Kgs/drum