Supply of cleaning agent for heat transfer oil hot press

Heat-conducting oil hot press cleaning agent
The third-generation non-phosphorus and non-corrosive green environmental protection KD-L312 thermal oil hot press cleaning agent product independently developed and produced by Kaidi Chemical is composed of a variety of surfactants, carbon dissolving agents, etc., with very strong cleaning ability, which can make oil coke , Grease dirt and charcoal are completely dissolved in the cleaning solution. The price advantage of the direct supply from the manufacturer is obvious. The thermal oil cleaning agent provided by the company is of high quality and the price is favorable.
After a stage of operation of the heat-conducting oil boiler, the efficiency of heat transfer is often reduced. The fundamental reason is that the heat-conducting oil begins to coke in the conveying pipeline. This not only affects the quality of heat transfer oil, but also harms the safe operation of the entire transportation system and the hot oil boiler. Therefore, the heat-conducting oil furnace should be cleaned and maintained regularly. It is recommended that you use the environmentally-friendly KD-L312 heat-conducting oil cleaner product.
Kaidi brand KD-L312 heat-conducting oil hot press cleaning agent is a water-based heat-conducting oil cleaning agent, which has strong penetration, dispersion, solubilization, and emulsification. It has a good cleaning ability on grease and dirt, and its degreasing and decontamination Super washing ability. It can effectively remove the coking of 1+10mm thick heat transfer oil, and the cleaning effect is more than 90%. This product won the gold medal of the 3rd Shandong Science and Technology Expo. During the cleaning of the heat-conducting oil furnace, you can see the 0-3000g, 1-10mm thick heat-conducting oil coking on the filter of the heat-oil stove; the waste heat oil cleaning agent can contain 0.01%-1.5% heat-conducting oil coking; after cleaning , The color of the cleaning agent becomes brown-black.
Scope of application:
It is used to clean heat-conducting oil furnaces widely used in various industries (petroleum, chemical, textile, printing and dyeing, chemical fiber, plastics, building materials, heating), or heat exchange equipment using heat-conducting oil as the working medium.
When cleaning the hot oil furnace system, pay attention to the following operating procedures:
1. Drain the old oil.
2. Clean with clean water.
3. Cleaning with detergent.
4. Water washing①: Fill the system with clean water, turn on the circulating pump to circulate, and rinse the system.
5. Wash with water②.
6. Wash with water ③.
7. After the discharge is completed, use compressed air to purge the remaining water in the system until it is exhausted.
8. Add new oil: Inject new heat transfer oil into the system.
9. Dehydration: The dehydration method is the same as the dehydration standard before the use of the new system.
If you have product needs and questions, please call Kaidi Chemical to request a heat transfer oil furnace system cleaning or heat exchanger cleaning plan and quotation