Thermal oil cleaning agent

The coking and carbon generated during the use of heat transfer oil will form a thermal insulation layer on the one hand, resulting in a decrease in heat transfer effect, an increase in exhaust gas temperature, and an increase in fuel consumption; on the other hand, due to the temperature requirements of the production process, the heating furnace tube wall The temperature difference will rise sharply. If the temperature difference between the inside and outside of the furnace tube increases to 600-700℃, it will easily burn through the furnace tube and cause a fire safety accident.

AJ-3-121 heat conduction oil cleaning agent is a water-based heat conduction oil cleaning agent, which has strong penetration, dispersion, solubilization, and emulsification, and has a good cleaning ability for grease and dirt. Its degreasing, decontamination and washing ability is super strong. The product does not contain inorganic ions, is antistatic, easy to rinse, no residue or very little residue, can be cleaned with low foam, can improve working conditions, and prevent environmental pollution; and can effectively protect the surface of the material to be cleaned while cleaning erosion. AJ-3-121 heat transfer oil cleaning agent is specially used to clean the heavy grease, oil coke, sludge in the heat transfer equipment of heat transfer oil and the oxidized grease and carbon deposits formed in various heat transfer oil furnaces.

AJ-3-121 heat transfer oil cleaning agent application scope:

1. Used to clean heat transfer oil furnaces widely used in various industries (petroleum, chemical, textile, printing and dyeing, chemical fiber, plastics, building materials, heating), or heat exchange with heat transfer oil as the working medium equipment.

2. It is used to clean the heavy grease, oil coke and oil sludge in the heat transfer oil system.

Principle: AJ-3-121 thermal oil cleaning agent is mainly composed of several surfactants under the synergistic effect of builders, firstly adsorb on the surface of grease stain, make it wet and swell, and then clean The agent penetrates into the oily dirt gap, so that the oily dirt is gradually crimped into micelles under the action of the composite cleaning agent, and is continuously emulsified. The pump continuously circulates and flushes, so that the dispersed and emulsified oily dirt can be separated from the heat transfer surface. AJ-3-121 thermal oil cleaning agent can effectively crush and disperse carbon deposits, but also dissolve organic hydrocarbons efficiently. The process is simple and basically non-corrosive to the equipment.

AJ-3-121 thermal oil cleaning agent use method:

1. Cyclic cleaning, spraying, ultrasonic, soaking, manual cleaning, etc.;

2. Concentration: 10%;

3. The cleaning temperature is 60-80℃.

If you have product needs and questions, please call Hebei Aijieneng Cleaning Service Co., Ltd. to obtain a cleaning plan and quotation.
aijienengxjl 3034598832 www.aijeon.com